1. Reset the Device - Make sure the doorbell is ready to be paired. Poke and hold the Reset Button of the doorbell until a beep is heard. 

2. Indicator Light Status - The indicator light will turn solid red, followed by another beep, to blinking red. 

3. Launch Geeni App and Add Device - Open the Geeni app and tap the plus sign "+" to add a new device. Select "Add Device" to begin the setup. Then click the "Smart Doorbell."   

4. Confirm Device Power- Tap "Next Step" if conditions for the doorbell have been met for Step 1 and Step 2.

5. Confirm Flashing Status | Reset the Device Page- On the "Reset the device" page or Step 3, at the top right corner, tap QR Code for Doorbell then switch to Wi-Fi Mode by tapping on it. A window that says "Switched to Wi-Fi Mode" will pop up. Hit "Next".

6. Enter Wi-Fi Password - Provide your Wi-Fi password under your Wi-Fi name and tap "Next Step" to proceed.

7. Wait for Connection - Wait for the 2-minute countdown, and once completed, tap "Done" to finish the setup.

You're all set!

Should you encounter any issues, refer back to this guide or feel free to reach out to our customer support team. We're here to assist you every step of the way. Enjoy the convenience of secure and accessible home monitoring with Geeni.