Before we continue, you need to make sure that nothing is missing from the box. You also need to download the Geeni app and create an account. The general system requirements have to be met before the setup.

Depending on the model of the camera you have, your camera can be reset by pressing and holding the reset button or by inserting a pin in a reset hole until you hear a prompt tone from the camera. Once you hear the prompt tone, let go of the reset button or the reset hole.

Your camera’s indicator light should start blinking after the tone. This blinking light means your camera is in pairing mode.

Launch the Geeni app and on the top right corner of the screen, tap + or Add Device. 

You will see some tiles on the next page with different device names and select Wi-Fi Camera.

You will be routed to a page that shows your Wi-Fi name and underneath it, type in your Wi-Fi password, then hit Next Step.

Confirm "Yes, it is flashing quickly" and tap "Next step"

The QR code will appear on the screen and scan it in front of your camera’s lens. Ensure your phone’s brightness is at max level. You can follow the short video clip for scanning the QR code until another prompt tone is heard. Confirm “I heard a prompt” and hit “Next Step”.

Wait for the 2 minutes countdown, then tap "Done" once connected.

You're all set! 

That Didn't Work? Please try setting up using Easy Mode.