Before we continue, you need to make sure that nothing is missing from the box. You also need to download the Geeni app and create an account. The General System Requirements have to be met before the setup process. 

 Make sure the Doorbell is powered on. Do the QR Mode set-up. Insert the pin into the reset hold, push and hold until you hear a prompt tone from the Doorbell. Once you hear the prompt tone, let go of the reset hole. 

Your Doorbell’s indicator light should start blinking after the tone. This blinking light means your camera is in pairing mode.

Launch the Geeni app and on the top right corner of the screen, tap + or Add Device. 

You will see some tiles on the next page with different device names and select "Smart Doorbell".

You will be routed to a page that shows your Wi-Fi name and underneath it, type in your Wi-Fi password, then hit Next Step.

Confirm "Yes, it is flashing quickly" and tap "Next step"

The QR code will appear on the screen and scan it in front of your Doorbell’s lens. Ensure your phone’s brightness is at max level. You can follow the short video clip for scanning the QR code until another prompt tone is heard. Confirm “I heard a prompt” and hit “Next Step”.

Wait for the 2 minutes countdown, then tap "Done" once connected.

You're All Set!

That didn't work? Try setting up using Easy Mode.