Setting Up Smart Camera through Wi-Fi Mode
-
Reset the Device - Make sure the camera is ready to be paired. Press and hold the Reset Button of the camera until a tone is heard.
-
Indicator Light Status -The indicator light on the camera will turn solid red, followed by another prompt sound, and then it will start blinking red.
-
Launch Geeni App and Add Device- Open the Geeni app and tap the plus sign "+" to add a new device. Select "Add Device" to begin the setup. Then click the "WiFi Camera."
-
Confirm Device Power - Tap "Next Step" if conditions for the camera have been met for Step 1 and Step 2.
-
Confirm Flashing Status | Reset the Device - Page On the "Reset the device" page or Step 3, at the top right corner, tap QR Code for Camera then switch to Wi-Fi Mode by tapping on it. A window that says "Switched to Wi-Fi Mode" will pop up. Hit "Next".
-
Enter Wi-Fi Password -Provide your Wi-Fi password under your Wi-Fi name and tap "Next Step" to proceed.
-
Wait for Connection - Wait for the 2-minute countdown, and once completed, tap "Done" to finish the setup.
You're all set!