Please make sure your smart device is plugged in. If your device is a smart humidifier or a diffuser, the reset button is also the power button. If it is a smart purifier, the timer (clock icon) is the reset button. Press and hold the reset button until the LED indicator light is blinking slowly.

1. Launch the Geeni app and on the top right corner of the screen, tap +. You will see some tiles on the next page with different device names and choose “Smart Appliance”.
2. The next page will show your 2.4 GHz Wi-Fi name. Enter your 2.4GHz Wi-Fi password then click “Next Step”. (Make sure your Wi-Fi password is correct).
3. A message will pop up, then choose "Slowly (every 2 sec): Manual Mode".
4. Next, you will be directed to a page saying “Let's connect to the device's unique hotspot”, then tap “Connect now”.
5. You will be routed to your phone’s Wi-Fi settings, from there look for a unique hotspot name (ex. Geeni-XXXX, Merkury-XXXX or iHome-XXXX)
6. Tap on it to connect. If you see “Unsecured connection” or “This device has no internet” after connecting to the unique hotspot, ignore it and go back to the Geeni app.
7. Then, you will see the connection process on the app. You can wait for the countdown or look at the progress of the dotted line. Tap “Done” in the upper right corner once the device has been added successfully. After that, you will see your device's control panel.