Guide to Setting Up Your Geeni Camera: Bluetooth and Wi-Fi Modes
Geeni cameras offer a user-friendly and seamless setup process, allowing you to monitor your space effortlessly. Whether you're connecting through Bluetooth or Wi-Fi mode, this guide will walk you through the steps to ensure a successful and hassle-free setup.
Note: User need to Enable Bluetooth and Location. Before diving into the Geeni app, ensure that Bluetooth and Location services are enabled on your smartphone by going directly to you phone main settings and have it set on allowed/ enabled.
Note that is very crucial for the initial setup process.
Setting Up process
• Launch Geeni App and Add Device
Open the Geeni app and tap the plus sign "+" to add a new device. Select "Add Device" to begin the setup.
• Confirm Device Power
Ensure your Geeni camera is powered on, and hit "Next" in the app to proceed.
• Reset the Device
Press and hold the Reset Button on the camera until you hear a beep or chime. Don't be alarmed by the musical tone – it's a normal part of the process.
• Indicator Light Status
The indicator light on the camera will turn solid red, followed by another prompt sound, and then it will start blinking red.
• Confirm Flashing Status
When prompted, confirm that the indicator light is flashing quickly and tap "Next step" in the app.
• Enter Wi-Fi Password
Provide your Wi-Fi password under your Wi-Fi name and tap "Next Step" to proceed.
• Scan QR Code
Hold your smartphone with the displayed QR Code in front of your Geeni Camera lens (6-8 inches) until you hear the prompt. Confirm that you heard the prompt and tap "Next Step."
• Wait for Connection
Wait for the 2-minute countdown, and once completed, tap "Done" to finish the setup.
Note
If the initial setup fails, you can follow the app's instructions to add your device again.
Setting Up Through Wi-Fi Mode
• Open Geeni App and Add Device
Launch the Geeni app, tap the plus sign "+," and select "Add Device."
• Confirm Device Power
Ensure your Geeni camera is powered on, and hit "Next" in the app to proceed.
• Reset the Device
Press and hold the Reset Button on the camera until you hear a beep or chime.
• Indicator Light Status
The indicator light on the camera will turn solid red, followed by another prompt sound, and then it will start blinking red.
• Switch to Wi-Fi Mode
On the top right corner, tap the QR Mode, and from the drop-down menu, choose "Wifi Mode."
• Confirm Flashing Status
Confirm that the indicator light is flashing quickly and hit "Next step" in the app.
• Wait for Connection
Wait for the 2-minute countdown, and once completed, tap "Done" to finish the setup.