Reset the Doorbell again by inserting a pin in the reset hole. Wait for a prompt tone and then release.
You should be on the Geeni app’s home page. When the Doorbell starts blinking, tap + or Add Device.
Tap Smart Doorbell.
Type in your Wi-Fi password, then hit Next Step.
Look at the top right corner of the screen and look for QR mode, tap it and it will show Easy Mode. Choose Easy Mode.
Confirm "Yes, it is flashing quickly" and tap "Next step"
Wait for the 2 minutes countdown, then tap "Done" once connected.
Once connected, you're all Set!